The following is an archive of Nik’s CATIA V5 Tips and Techniques. To unleash the full functionality of CATIA V5, attend an AscendBridge CATIA Course or request a one day mentoring at your site. Call 1-888-326-TEAM or email [email protected] com #1 Tips and Technique Q: Do you know how to convert a 2D drawing view (in dwg format) into a 3D Part using Advance Part Modeling options of CATIA V5? A: You Can use any 2D view with various drawing objects (even in dwg format) to create a 3D Solid. Copy the 2D view from CATIA drafting screen into Sketcher as sketch.
As the sketch contains multiple Profiles you can not make a solid feature by simply selecting the given sketch, as a error prompts: Several Open Profiles If you select Yes the Feature definition box appears. Right click in blue area in front of ‘Profile/Surface Selection’ Click on ‘Go to Profile Definition’ in Contextual menu Profile Definition Dialog Box opens Select the Part of Sketch you want to use for that feature. You can go on creating other features using same sketch but different sub profiles to make the final 3D Part.
This method also helps in reducing the number of sketches in your Part history tree while modeling complex solids and better management of features using sketches. AscendBridge Solutions Inc. 1-888-326-TEAM www. ascendbridge. com Nik’s CATIA V5 Tips and Techniques #2 Tip and Technique Q: Did you know that designers can key in values in combination of units or in formulas in CATIA V5 dialog boxes? A: You can key in values in any CATIA V5 dialog box in the following formats irrespective of the Standard set units. For example if the length Units are set in mm and you are keying in the value for PAD length (as shown in Fig-1A)
You can key in 10in and the PAD will measure 254mm (as shown in Fig-1B) AscendBridge Solutions Inc. 1-888-326-TEAM www. ascendbridge. com Nik’s CATIA V5 Tips and Techniques Also try to key in ((5in*6)/4)+9mm+500micron and click Preview the PAD will measure 200mm. The software automatically computes the entered value (even in the form of complex formula with combined units) equal to the units set in the CATPart and generate features with correct computed measurements. AscendBridge Solutions Inc. 1-888-326-TEAM www. ascendbridge. com Nik’s CATIA V5 Tips and Techniques 3 Tip and Technique Q: Do you know how to create a Hole with reference to center of another Hole in a Block or Plate using hole feature in CATIA V5? A: You can create a Hole with reference to center of another Hole in a Block or Plate using HOLE feature in CATIA V5 by following this procedure: • • • HOLE Command Select the face of Block / Plate Select the Sketcher Icon • • Rotate the view Create two constraints Horizontal Measure & Vertical Measure between Axis of previous hole and the Center Point of new Hole • • Exit the Sketcher Work-bench and OK in Hole Dialog-box. New hole located from center of previous hole is created.
AscendBridge Solutions Inc. 1-888-326-TEAM www. ascendbridge. com Nik’s CATIA V5 Tips and Techniques #4 Tip and Technique Q: Do you know how to create multiple corners on a complex Profile, of equal radius and related to each other in CATIA V5 Sketcher? A: You can create multiple corners on selected points on a Profile in one step by following this procedure: • Draw a required complex Profile in CATIA V5 Sketcher (as shown in Fig-1) • Multi-select all the points on the Profile where the corners are required and select the Corner icon.