Last Updated 06 Jul 2020

D.T. Resistant Materials – Evaluation

Essay type Evaluation
Words 763 (3 pages)
Views 381

I feel that my product has fulfilled all of the essential criteria although some of the desired criteria aren't fulfilled. This includes:

* Incorporated Lights

* A Combination of Materials

Order custom essay D.T. Resistant Materials – Evaluation with free plagiarism report


* Be used for placing an object on top

The reason behind these specifications not being fulfilled was mainly due to limitations or the way it would have to be incorporated into the design I chose. If I decided to incorporate lights, the price would have rose as well as me having to make the boxes more bulky making them a lot more difficult to move and customise. A combination of materials wasn't used because of complications and problems which I will explain later and to be used for placing an object on top, the product would become less customisable, however an add on could be designed for my product in the future which would allow this, but as current because of time scale and general problems (which I will explain) this is an unavailable feature.

What it does and how good it is at doing it

My product is designed to allow users to store objects such as books and paperwork in. Teenagers, my target audience, would be able to customise the product by adding different tops as well as a different combination of boxes of which came in two sizes. The system I designed allowed the boxes to be placed on top of each other as well as beside each other.

After testing, I found that the average sized box fitted perfectly, mainly due to my research which I carried out earlier. Papers unfortunately didn't fit without aid such as a folder or possibly something which allowed the paper to stand on end. Having said this, the product was perfectly able to stand the weight and the customisable feature with everything lining up with little add on features which gave room for error as well as being extra features to the set.

After asking other 15/16 year olds, comments were very positive particularly with the engraved design on the side which matched with the add on spacers as well as the fact the boxes could be stacked or put on the side. They also liked the idea of the customisable top which could be turned into a different wide range of add-ons which could have been added to in the future if desired.

There were few negative comments which were probably due mainly to pure politeness! Having said this, the ones I received were well constructed such as the fact that paper couldn't be placed flat without it sticking out the side as well as the fact that the choice of finish allowed the pine to show which was of a colour too bright to some people's preference.

Modifications and/due to Problems

One major problem I came up against was the fact that I was unable to cast a peg. This was due to limitations of knowledge on casting as well as the time limit I was restricted against. Our first trial was shown on my developing ideas section where only one half of the peg seemed to come out correctly. This, unfortunately, made me skip the variety of materials desired criteria.

Another problem was accuracy. I was only making one of many of these products and because of this I opted to create the top plate by hand. Having done this I soon realised that it was very difficult and time consuming to get it correctly placed. Due to this fact I modified the size of the dowel from 8mm to 6mm which meant that the 8mm hole will now have 6mm slotted into it with the top plate. Because of time restrictions, it wasn't possible to create other add-ons such as the CD rack I planned earlier on. Instead I opted in a different material which would make the product more appealing (aesthetically pleasing).

Accuracy was also another problem which I faced when joining the boxes together. I originally planned to join the boxes directly against each other. Because of 8mm holes being in the top and the bottom, 8mm dowel had to be used and the fact is that there was no room for error which became a problem. I solved this by creating a spacer which contained 6mm dowel which would slot into both the bottom and top box. This was a viable solution.

Design problems also caused the boxes to be connected sideways only one possible direction as the boxes would not slot into each other on one side. This problem was one which I didn't fix as the boxes could still tessellate one way which made this problem very minor.

This essay was written by a fellow student. You can use it as an example when writing your own essay or use it as a source, but you need cite it.

Get professional help and free up your time for more important courses

Starting from 3 hours delivery 450+ experts on 30 subjects
get essay help 124  experts online

Did you know that we have over 70,000 essays on 3,000 topics in our database?

Cite this page

Explore how the human body functions as one unit in harmony in order to life

D.T. Resistant Materials – Evaluation. (2017, Sep 28). Retrieved from

We use cookies to give you the best experience possible. By continuing we’ll assume you’re on board with our cookie policy

Save time and let our verified experts help you.

Hire writer