Landscape Procurement Plan

Following a major renovation and addition to the house, a redesign of the front yard is required. This redesign will encompass the front yard that is approximately 65 ft wide by 70 ft deep. The area is bounded on the south side by the house and a wooden fence, on the west side by a continuation of the wooden fence for approximately 40 feet. The north side is to the property line, and the east side is bound by the driveway. There is a sidewalk that comes away from the house to about 25 feet and turns to the driveway. The area enclosed by the driveway and sidewalk is approximately 350 ft2.

The major components of this redesign consist of grading and removing excess soil remaining from remodel, install electric wiring for exterior lighting, install hardscape, landscape design and installation of the plants and trees. What is not included in the scope of this project is the seeding of the lawn area, lawn maintenance, removal of existing plants and painting/staining of existing fence.

Make or Buy Analysis:

Order custom essay Landscape Procurement Plan with free plagiarism report

450+ experts on 30 subjects Starting from 3 hours delivery

Get Essay Help

While my husband and I have the ability to perform the majority of the tasks associated with the landscape redesign, the constraints of time and manpower limit the amount of work that we will perform.

The larger trees and plants will be installed by the nursery. We will install the smaller plants. Soil remains from the excavation of the foundation and new basement sections of the addition. The majority of the soil will be removed to another location on the property to fill in low spots.

This soil will be spread in a manner that will result in a reasonably level location relative to the surrounding area. Following removal of the excess soil, the front yard will be re-contoured according to the specifications outlined in the landscape design. The electric will consist of exterior grade wiring/conduit running from the main electric panel located in the northeast corner of the basement. The exterior lighting will be on its own circuit with dedicated breakers. The conduit will be placed below grade and extend beyond the sidewalk, to the edge of the driveway.

An exterior rated junction box will be installed with additional connections to allow expansion of the exterior lighting as needed in the future. An exterior light pole and fixture will be installed that includes, at a minimum, one exterior outlet. Additional conduit will be placed below grade to the northwest corner of the house. An LB will be installed to bring the electric wiring aboveground to provide power to two exterior outlets for general use.

Landscape design

Evaluation of soil type and condition, elevation and directionality of front yard to be completed.

Based on this evaluation, any modification or supplementation of the soil will be performed as needed. A selection of trees, shrubs, and perennial plants will be chosen, collectively identified as “plants” throughout the remainder of the plan. The design of the landscape shall include the overview diagram, the planting schematic and all care instructions for selected plants. A minimum of three alternate plants will be provided in addition to the plant identified in the design. The majority of the plants should be considered native to the Midwest. Trees and tall shrubs must be located away from overhead power and phone lines.

The design must include what is collectively known as 3 season plants, which have blooms, seed heads, etc. visible during spring, summer and fall. All ornamental grasses must be less than 4 foot tall. A minimum of 2 flowering trees must be included in the design. One large tree, defined as 10 – 12 foot tall, with trunk diameter of at least 6 inches, must be included as well. The design will include evergreen as well as deciduous plants and shrubs. The overall design should be identified as low maintenance, consisting of sufficient plantings to minimize weeds, identification of various covers, such as hardwood mulch and decorative rock/gravel.

Installation of plants

The plants will be installed according to the agreed upon design and plant selection. If, for any reason, a plant is not available, a substitute will be chosen and installed in its place. Plants will be installed with appropriate care to minimize any shock or trauma sustained by the plants. Following installation, return visits to evaluate the health of the plants will occur at agreed upon intervals as appropriate. Should any plant not be thriving, or performing as expected, the plant may be replaced with a substitute identified in the design plan.

Installation of hardscape

Hardscape is generally defined as permanent fixtures, such as statuary, fountains, etc. in a garden or landscape setting. All locations will be prepared according to the design and the hardscape features identified in the landscape design will be purchased OTS or built as time and budget allow.

The documentation required to obtain services for each activity is listed below.

Each of the identified vendors have the ability to perform all required tasks outlined in the statement of work and generally perform these tasks as a single contracted job.At least 10 days lead time will be given to the initiation of the project to ensure electrical work will be completed. The lead times will also be dependent on weather conditions. If rain postpones work, the schedule will be adjusted accordingly.

We will act as general contractors for this project. We will be responsible for all phases of the project. We will also be responsible for having underground utility location performed in advance of any excavation. The proposal shall have 2 prices:

1. Complete design and installation,
2. Just the overview diagram, the planting schematic and all care instructions for selected plants

All locations will be prepared according to the design and the hardscape features identified in the landscape design will be purchased OTS or built as time and budget allow. Any permanent placements requiring electrical or plumbing connections should be identified and specified before completion of the electrical work found in the SOW.

Don't let plagiarism ruin your grade

Run a free check or have your essay done for you

Check my essay Hire Writer