Occupational, safety, and security at work place

This boils to the fact that a rocker will perform his duties to the fullest only when he Is sure that even when an accident occurs he will be taken good care of. "One of the most important things that an employer should provide to his employees Is safety even at a low risk site" says Pushup Vela the human resource assistant at Prime Aluminum Ltd.

Brief History of Safety and security is that one of the effects of the Europeans coming course of time it was discovered that it was absolutely necessary to safeguard the interest of both the employer and the employee, hence the introduction of the arioso means of regulating employer-employee relationship.

Initially, it was thought that the employees were being made objects of servitude but in the long run it became apparent that this sort of relationship requires the incorporation of rules to avoid either party being cheated out rightly. Labor law which was fashioned to ameliorate the prevalent crisis engulfing the industry in England at a time was adopted in Nigeria as a direct consequence of colonialism by the United Kingdom. 1. Purpose of the Study The purpose of this study is to seek and to find out whether there are challenges inherent in this area that a human resource manager faces in his day to day routine duties within the organization thereby suggesting possible solutions that sought to overcome some of the challenges and well as providing some recommendations for the organization and to discuss and understand how Prime Aluminum Ltd deals with their occupational safety, health and security policy and what process it uses to achieve the broad objective of getting the relationship between employee and the employer and based on Prime aluminum Ltd. . 3 Scope of the Study By working on the term paper, Vive been able to understand how the policy has been incorporated in the institution, the challenges faced in the human resource department in implementation of such a policy, the presentation of some of the solutions as well as some of the recommendations Vive been able to come up in the course of my research. When I carried out this research, I experienced some scopes in the area of this report.

Order custom essay Occupational, safety, and security at work place with free plagiarism report

450+ experts on 30 subjects Starting from 3 hours delivery

Get Essay Help

Bearing in mind the acquaintance and time of the paper has been wide- ranging specifically within the revision challenges inherent in the area of occupational health, safety and security suggesting the possible solutions as this rear basically deals with the top management level and low management. Being a student of Human Resource Management class, I got a chance to work with the Assistant Head of Human Resource, Mrs...

Pushup Villain, where I got a chance and experience to engage on a one on one interview where she took me through the occupational health, safety and security policy and processes and how it makes sure they achieve their goals in the organization. 2. 0 Focus on Organization 2. 1 About Prime Aluminum Ltd Prime Aluminum Ltd has over 40 years of experience in their team of specialists;

Prime Aluminum Casements Limited (PACE) has built a reputation of providing high quality solutions for aluminum windows, doors, structural glazing, curtain walling, ceilings, partitioning, claddings, office fit-outs and external fade related requirements across all building sectors. It is located on Mambas road as well as Lemur road. Prime prides itself in accomplishments and finding high quality solutions for all aluminum windows, doors, structural glazing, curtain walling, requirements for clients in an equitable, environmentally friendly, socially responsible and economical manner.

Improve working conditions that are necessary to ensure higher labor productivity, better quality work, healthier labor relations and compliance with quality standards. Health and safety in the workplace is no more a new thing or issue in organizations but it is still handled as a new topic in, Prime Aluminum of today all because of the way it is being practiced. However, there appears to be some gradual improvement in awareness and practice. This part of this research work is meant to examine and describe the law as it relates to health and safety at work 3. Findings

Research Questions Analysis This part of the study presents the response of the HER of Prime aluminum on safety health and security policies distributed questionnaires and as obtained from the interview How do Security policy, health and safety help with strategic decision making? Pushup: Strategic decision making is all about risk management. Getting the right information on Security policy, health and safety improves the chances of success, and helps to prevent accidents - which every business needs to do because accidents are so costly, in all sorts of ways that many organizations do not realize before one occurs including Prime . He goal of the company is to focus on health of all the employees so as to get employers who are fit to do the Job. For example we had an employee who was injured where he was working in the site. He was a very potential employer but due to less safety we lost him. Thus we are now struggling to get one who did such a great Job which is costing us a lot. What is the perception of the employees on health and safety issues and policies? Pushup: This part of this research work is meant to examine and describe the law as it relates to health and safety at work.

By law, employers have to protect employees' health, safety and welfare at work. They have to make sure the workplace is safe and without risk to health. As part of this duty, employers must: 1. Keep dust, fumes and noise under control 2. Make sure that plant and machinery are safe and regularly maintained, and that the systems used in the workplace are safe 3. Provide protective clothing where necessary 4. Report certain diseases and injuries to the relevant authority 5.

Provide adequate first aid equipment and facilities At sites where heavy machinery are being used; it is certain that the level is higher cause of the mechanical movement of parts of such machinery and therefore for the employee that will be monitoring or operating such machinery will be exposed to accidents. In a case like this, it should be known that the level of safety that will be provided will be much more than that of a site where ordinary hand tools are been used.

Based on the above, we now understand that the level of Safety and Health protection will be higher nowadays because of the rapid mechanization of the manufacturing industry and the accidents that may occur will definitely be more fatal elicits. Do health and safety career problems actually reach the top and directors? Pushup: Health and safety is one crucial element of the mix of skills, along with finance, marketing and human resources, for example. It is becoming increasingly important because this could cost the firm a lot. UT in most cases the top directors are hard to reach because they are normally out of own doing business and it gets difficult for the HER to focus both on the workers at the sites and at the office. But these problems are normally taken care of at the end of the day. Could you give some examples of the biggest safety risks being faced by leaders? Pushup: employees undoubtedly face their biggest risks while driving for work. There is a very personal effect on individual directors - a director can set an appropriate example - or an inappropriate one.

For example, if they speed to reach yet another meeting, or if they work long hours and drive a long way home after exhausting meetings. Directors have the legal responsibility if things go wrong and police will prosecute if, for example, a driver falls asleep at the wheel because of an over-long working day. What can they do about it other than set an example? Pushup: One of Prime aluminum's key issues is the management of occupational road risk - driving for work - which is why we offer a full range of solutions which can be targeted at those deemed to be the highest risk.

These range from consultancy to driver training, and also computer-based driver risk assessments, which can be the cheapest, but most effective, way to start. What comes after that? Pushup Consider again the director who is a keen motorcyclist - if he or she suffers an accident it could bring the business to its knees! From Prime aluminum's work with its key major award winners we know that one in five accidents occurs in the home or while at leisure, so if we can reduce those, then the negative cost that accidents cause the workplace can be greatly reduced as well. What sort of training is available to directors?

Pushup: Because directors have limited time available they will often not be able to go on pre-scheduled safety training courses. Prime aluminum addresses this through two routes: Conferences, where directors can network and key new developments can be highlighted by top speakers such as leading personal injury arresters and FETES 100 leading company case studies given by their chief executives Tailored consultancy and in-company safety training means that companies can have a day or two of intensive focus on health and safety which is exactly right for their business.

All of these options make directors aware of their legal duties and responsibilities, as well as the savings they could make if safety is properly managed, and the positive benefits of doing it properly. 4. 0 Challenges and solutions at Prime Aluminum Ltd security of his employees. Health and safety form an integral part of work environment. A work environment should enhance the well -being of employees and thus should be accident free.

The terms health, safety and security are closely related to each other. Health is the general state of well-being. It not only includes physical well-being, but also emotional and mental well-being. Safety refers to the act of protecting the physical well-being of an employee. It will include the risk of accidents caused due to machinery, fire or diseases. Security refers to protecting facilities and equipments from unauthorized access and protecting employees while they are on work.

According to Folia, & et al (1993), asserted that a proper understanding of the various work situations in manufacturing, textile, mining, construction and other labor intensive industries reveal that workers are exposed to hazards. These include: physical contact with poisons, dust inhalation, exposure to organic and inorganic chemicals, extreme temperatures of hot or cold, accidents, injuries, falls, burns and scalds, other dangers and sudden death. However, the health and safety of the workers have been recognized as a fundamental human right.

The need to foster a safe work environment, protect co-workers, family members, employers, customers, suppliers, nearby communities and other members f the public impacted by the workplace environment is the primary goal of all Occupational Health and Safety(OH)practice An integrated occupational health and safety policy is essential for developing a stable and productive work environment. The government has in recent time enacted laws regulating the labor market and it has also been revised to promote healthier labor relations, appropriate working conditions, equity in the workplace and improved skills.

Improved working conditions are necessary to ensure higher labor productivity, better quality work, healthier Barbour relations and compliance with quality standards. The economic gains associated with occupational health and safety policy improvements include: a. Increased productivity and worker morale; b. Reduction of working time lost due to injury and disease; c. Reduced equipment down-time, reduced damages to materials and machinery, and savings in the costs of recruiting and training replacement employees; d. Reduction in transaction costs such as insurance costs and legal fees.

Adequate occupational health and safety policy and standards are required for a nation's continued integration into the world economy. International investors who subscribe to world- class occupational health and safety standards are reluctant to invest in markets in which local firms are able to compete unfairly through reduced occupational health and safety standards. Increasingly, African exporters particularly those who export to developed economies are being required to comply with international quality management standards.

These standards require world-class performance in areas such as occupational health and safety policy, environmental protection and product safety A health and safety management system involves the introduction of processes designed to decrease the incidence of injury and illness in the employer's operation (Alberta, 2006). The successful implementation of this resources, and a high level of employee participation. The components of effective health and safety management system are briefly explained below: a.

Management leadership and organizational commitment. For this system to be effective, management must show leadership and commitment to the program. To achieve this, management should put the organization's expectation around health and safety into writing by developing a health and safety policy. Employees who forms part of the health and safety committee, should be involved in writing the policy, and to be signed by senior operating officer, to indicate the commitment of management. B.

Don't let plagiarism ruin your grade

Run a free check or have your essay done for you

Check my essay Hire Writer