A limited time offer!

urgent 3h delivery guaranteed

The technology for photovoltaic

1. Introduction

1.1 Photovoltaic History

The engineering for Photovoltaic dates back to over 160 old ages.

We will write a custom essay sample on The technology for photovoltaic

or any similar topic only for you

Order Now

A Gallic physicist, named Alexandre Edmond Becquerel, was the first to province his observations of the photovoltaic consequence in the nineteenth century. Since so, many scientists have worked to develop energy engineerings based on this consequence.

The basic scientific discipline was foremost discovered in 1839 but the gait of advancement truly accelerated in three major pushs in the twentieth century.

1839 Experimenting with metal electrodes and electrolyte, nineteen-year-old Gallic physicist Alexandre Edmond Becquerel observes a physical phenomenon leting light-electricity transition

1883 Charles Fritts, an American discoverer, describes the first solar cells made from Se wafers

1888 Edward Weston receives first US patent for “ solar cell ”

1901 Nikola Tesla receives US patent for “ method of utilizing, and setup for the utlization of, beaming energy ”

  1. Albert Einstein Makes His Mark
  2. It was n’t until Albert Einstein wrote his 1905 paper on the photoelectric consequence: “ On a Heuristic Viewpoint Refering the Production and Transformation of Light ” .

    1905 Albert Einstein publishes paper on theory behind “ photoelectric consequence ” along with paper on relativity theory

    1916 Robert Millikan provided experimental cogent evidence of Einstein ‘s theory on photoelectric consequence

    1922 Einstein wins Nobel award for 1904 paper on photoelectric consequence

  3. The Commercial Solar Age Begins
  4. Bell Laboratories, while working on Si semiconducting materials, discovered Si had photoelectric belongingss and rapidly developed Si solar cells, accomplishing 6 % efficiency and early orbiters were the primary usage for these first solar cells.

    1954 Bell Labs exhibits foremost high-octane Si PV cell. The New York Times forecasts that solar cells will finally take to a beginning of “ illimitable energy of the Sun ” .

    1955 Western Electric sells commercial licences for Si PV engineerings ; early successful merchandises include PV-powered dollar measure modifiers and devices that decoded computing machine clout cards and tape.

    1958 PV array powers radios on US Vanguard I infinite orbiter

    1963 Sharp Corporation produces a feasible photovoltaic faculty of Si solar cells. Japan installs a 242-watt PV array on a beacon, the universe ‘s largest array at that clip.

    1966 NASA launches Orbiting Astronomical Observatory with a 1-kilowatt PV array

    1970s Research thrusts PV costs down 80 % , leting for applications such as seaward pilotage warning visible radiations and horns beacons, railway crossings, and remote usage where utility-grid connexions are excessively dearly-won

    1973 Solarex Corp is founded by two ex-NASA scientists who worked on the development of satellite PV systems

    1974 Japan formulates “ Project Sunshine ” to fuel PV research and development

    1976 Kyocera Corp begins production of Silicon thread crystal solar faculties

    1977 US Dept. of Energy establishes US Solar Energy Research Institute in Golden, CO

    1980s Continued betterments in efficiency and cost enables PV to go a popular power beginning for consumer electronic devices, such as reckoners, tickers, wirelesss, lanterns and other little battery charging applications

  5. Progressive Governments Use Subsidies to Rush Adoption

To spur acceptance, Germany and so Japan initiated considerable subsidy plans and now those markets exist mostly without subsidies. In 2007, California leads the US with a similar 10-year plan.

1990 Germany launches $ 500MM “ 100,000 Solar Roofs ” plan. The Cathedral of Magdeburg installs solar cells on the roof, taging the first installing on a church in East Germany

1991 President George H. W. Bush directs the U.S. Department of Energy to set up the National Renewable Energy Laboratory ( reassigning the bing Solar Energy Research Institute ) in Sandia, NM

1994 Japan begins “ 70,000 Solar Roofs ” PV subsidy plan

1998 California initiates $ 112MM “ Emerging Renewables Program ” to fund discounts for & lt ; 30 kilowatt residential and commercial PV systems

2002 CA Public Utilities Commission begins $ 100MM “ Self Generation Incentive Program ” for & gt ; 30 kilowatt PV undertakings

2004 Five makers – Sharp, Kyocera, Shell Solar, BP Solar and RWE SCHOTT Solar – history for 60 per centum of the PV market. GE buys Astropower, the last leftover US independent PV maker

2006 The CA PUC demonstrates leading by sketching what will go the California Solar Initiative ( CSI ) , a 10-year, $ 3 billion solar subsidy plan.

2007 The CSI plan Begins and is good received by the market, with higher than expected application volume.

2008 Your company joins the aggressive list of California concern leaders who adopt solar power for their concern with Sunlight Electric.

Sunlight Electric, LLC. , 2002-2009 )

1.2 Photovoltaic Basics and Working Principles

The term photovoltaic is derived by uniting the Grecian words – “ exposure ” , intending visible radiation, and “ Gur ” , intending bring forthing electricity -means “ electricity from visible radiation ”

Photovoltaic which is abbreviated as PV is the term which is used to depict the solid province devices which are capable of direct transition of sunshine into direct current electricity.

Sunlight is made up of photons which are distinct units of light energy. When these photons come in contact with a PV cell, some photons are absorbed by the semiconducting material stuff and the energy is transferred to negatrons. With this extra energy, the negatrons can get away from their atoms and can flux as current in an electrical circuit.

PV systems are agencies of bring forthing electricity on-site from the Sun without any noise pollution and have no moving parts. These can hence theoretically bring forth energy boundlessly without necessitating any care. It is an established fact that in one hr the solar energy received by the Earth if converted into electricity can bring forth energy which is equal to the entire sum of energy consumed by all worlds in one twelvemonth.

The basic edifice blocks of PV faculties are the PV cells. PV cells are made up of semi-conducting stuffs, which typically is silicon and is doped ( doping is the procedure of deliberately presenting drosss into an highly pure semiconducting material to alter its electrical belongingss ) with particular additives. The entire sum of current that can be produced is straight relative to the size of the cell, its transition efficiency, and the strength of sunshine received. PV cells are connected together to bring forth PV faculties. PV faculties can be connected in series and parallel to obtain the coveted electromotive force and current severally. When the PV faculties are fixed together ( in series or analogue ) they are called an array.

( Eiffert and Kiss 2000 )

PV arrays necessitate really small care no other than cleansing of the surfaces on occasion when and if they become soiled or if the PV arrays are being used in dust-covered locations. However for an efficient operation it is necessary to maintain them clear of snow, weeds and any other beginnings which can shadow a part or whole of the array. As the PV cells are connected in series ( particularly to bring forth the coveted electromotive force ) , so shadowing even one cell in a faculty will diminish the end product of the full faculty appreciably.

1.3 Types of PV Systems

Photovoltaic power systems are by and large classified in conformity with their functional and operational demands, the constellation of their constituents, and how these equipments are connected to other power beginnings and electrical tonss.

The three chief categorizations are:

  • stand-alone systems
  • intercrossed systems
  • grid-connected or utility-interactive systems

.Photovoltaic systems can be designed to supply either DC and/or AC power ; these can run interconnected with or independent of the public-service corporation grid, and can be connected with other energy beginnings and energy storage systems.

a ) Stand Alone systems

Stand-alone PV systems are designed to such that they can run independent of the electric public-service corporation grid. They are normally designed and sized to provide certain DC and/or AC electrical tonss. These types of systems are powered by a PV array merely. In many stand-alone PV systems, batteries are used to hive away energy during the twenty-four hours clip when the Sun radiances to be used at dark.

B ) Hybrid Systems

These are an drawn-out version of base entirely system as they consist of a combination of a PV array and a complementary agencies of electricity coevals such as a Diesel, gas or air current generator. In order for the operation of the two electricity bring forthing systems to be optimal, intercrossed systems typically require more sophisticated controls than any standalone PV systems. For illustration, in the instance of PV/diesel system the Diesel engine must be started when the battery reaches a given degree of discharge, and so stopped once more when the battery reaches an equal degree of charge.

When a loanblend system is being used it is possible to utilize a smaller PV array and smaller batteries than would be required for an tantamount sized stand-alone system. Hence the entire cost of a intercrossed system may more cheaper to put in than a stand-alone system for some applications.

degree Celsius ) Grid or Utility Intertied Systems

Grid-connected or utility-interactive PV systems are designed such that they operate in analogue with and are interconnected with the electric public-service corporation grid.

The most of import constituent in grid-connected PV systems is the inverter. The inverter is required to change over the DC power produced by the PV array into AC power which is in line with the electromotive force and power quality demands of the public-service corporation grid and is capable of automatically halt providing power to the grid when the public-service corporation grid is non energized. This system requires a bi-directional interface between the PV system AC end product circuits and the electric public-service corporation web, typically at the on-site distribution panel or at the service entryway. This allows the AC power which is being produced by the PV system to either supply to the on-site electrical tonss or to back-feed the grid when and if the PV system end product is greater than the on-site burden demand. At dark and during other periods when the electrical tonss required on-site are greater than the PV system end product, the balance of power required by the tons is received from the electric public-service corporation. There is a safety characteristic built into all grid-connected PV systems, to guarantee that the PV system will non go on to run and feed back into the public-service corporation grid when the grid is down for service or fix.

1.4 Photovoltaic System Components

Typical Components required for a Photovoltaic System are:

  1. PV Array:
  2. A PV Array is made up of environmentally-sealed PV faculties, which are aggregations of PV cells, the devices that convert sunlight to electricity.

  3. Balance of system equipment ( BOS ) :
  4. BOS includes climb and wiring systems which are used to incorporate the solar faculties into the structural and electrical systems. The wiring systems include all the isolation devices which are required for the District of Columbia and ac sides of the inverter, all the ground-fault protection equipment, and over current protections for the solar faculties. Most systems besides include a combiner board of some sort since most faculties require fuses for each faculty beginning circuit. Some inverters include this fuse and uniting map within the inverter enclosure.

  5. DC-AC inverter:
  6. An inverter is a device that takes the dc power from the PV array as an input and converts it into standard Ac power which is required by the tonss to which it is feeding.

  7. Batteries:
  8. This includes batteries and battery enclosures, battery charge accountant and separate sub-panel ( s ) for critical burden circuits.

  9. Metering:
  10. This includes metres to supply measuring of the system public presentation. Some metres can bespeak the use of energy.

  11. Other constituents:
  12. These include the public-service corporation switch and protections as required by the local public-service corporation section.

1.5 Definition – Building Integrated Photovoltaic

The acronym BiPV ( Building integrated Photovoltaic ) refers to systems and constructs in which photovoltaics are integrated within the edifice ; they take on the function of edifice elements functioning a secondary intent such as roof, fa & A ; ccedil ; ade or a shading system every bit good as holding the map of bring forthing electricity. However bing edifices may be retrofitted by adding BIPV faculties on the top of already constructed constructions as good.

The chief advantage of BiPV over the common non-integrated systems is that its initial cost can be offset by cut downing the sum that had to be spent on edifice stuffs and labor usually that the BIPV faculties replace. In add-on, as BIPV are an built-in portion of the edifice design, they by and large blend in better with the edifice and are more aesthetically more pleasing than other solar options

It means that they give best consequences if built/constructed along with a building/structure. They should besides be planned together with the edifice. Yet, they could be built subsequently on. They require working together of many different experts, such as designers, civil applied scientists, electrical applied scientists and PV system interior decorators.

1.6 Application of Building Integrated Photovoltaic

The photovoltaics can be integrated with the edifices and constructions as follows:

a ) Facade systems

The BIPV system can be designed to move as an outer tegument and weather barrier as portion of the edifice envelope. BIPV systems are by and large the glass merchandises which are typically used as facade systems ( laminated and patterned glass ) , spandrel glass panels, and curtain wall.

These can replace traditional building stuffs. Laminated glass is the most common BIPV merchandise used for the Fa & A ; ccedil ; ade systems. It is made up of two pieces of glass with PV solar cells sandwiched between these glass pieces, an encapsulant like ethylene-vinyl ethanoate ( EVA ) or another encapsulant stuff, and a translucent or coloured tedlar-coated polyester back-sheet. The designer can bespeak the spacing between solar cells, which will find the power supply and besides permit the design of inactive solar characteristics by modulating the sum of twenty-four hours illuming allowed to come in into the edifice

The photovoltaics used as edifice frontages have many advantages as they bring in natural visible radiation, ocular contact with the nature and can lend as an of import component of inactive solar energy. These make it possible to conjugate production of energy, aesthetics and thermic comfort. ( Eiffert and Kiss 2000 ) and ( Jesus, Manuela and Pereira 2005 )

B ) Atrium systems

In this system BIPV is a glass component joined with PV faculties that provides different shading degrees and can be designed to heighten indoor thermic comfort every bit good as usage of natural daytime.

The semi-transparent PV faculties are most rather frequently used within the commercial atria as these can be used to replace traditional shading solutions which by and large have high care costs associated with them. However, compared to standard dual glazing systems, an component which incorporates either glandular fever or poly crystalline PV cells in a glass-glass building does come at a cost premium. But this cost premium can be offset as taking PV laminates for the atrium roof has multiple benefits for the edifice users, such as electricity coevals, solar shading, environmental and engineering statements, enhanced comfort and esteemed office workspace.

Many researches have confirmed that the application of PV in atria is justified from both fiscal, environmental ( CO2 emanations ) and architectural positions. Using BIPV in the atria is possibly the most appropriate usage of PV today. As betterments happen in the cell efficiency and in peculiar the inverter dependability, it will further profit the economic sciences of PV atria and do its usage far more common topographic point. ( Eiffert and Kiss 2000 ) and ( James, Jentsch. and Bahaj 2008 )

degree Celsius ) Awning and Shading systems

A assortment of PV stuffs can be mounted onto a frontage in aesthetic mode to function as sunshades.

vitamin D ) Roofing systems

The BIPV roofing system replaces conventional roofing stuffs such as tiles, herpes zosters, and metal roofing. This system can be applied to atilt roofs every bit good as plane coverings. This system has several advantages other than bring forthing electricity such as decrease in care costs, pays back the installing costs in shorter periods due to its privileged placement for the response of solar energy. BIPV applications in plane coverings have extra advantages like its capacity to widen the roof life through its belongings of protecting the insularity and membrane from ultraviolet beams and from debasement caused by rain. ( Eiffert and Kiss 2000 ) and ( Jesus, Manuela and Pereira 2005 )

1.7 Design Issues

In order to obtain an optimal public presentation by the integrating of a photovoltaic system into edifices it is required to give due consideration to its constructability and functionality, as its installing is different from the conventional PV installing method which merely need back uping constructions opened to air. The efficiency of BIPV system is determined by the method that is applied to the edifice envelope, every bit good as the efficiency of PV system itself. In add-on to the general specifications of a PV system, there are assorted design factors that may make up one’s mind the public presentation of the BIPV systems.

In any state of affairs of BIPV integrating, the undermentioned factors should be taken in consideration in all design and executing stage:

  • Environmental Factors – Climatic informations – temperature, solar radiation – of the location must be known, this is because the solar entree, the incidence of solar radiation that reaches a PV surface at any given clip, determines the possible electrical end product of a BIPV system.

It is besides of import to cognize the latitude of the topographic point and the solar orientation ( an disposition angle of the faculties ) as presentations have shown that a system installed at a tilt angle equivalent to the site latitude produces the greatest sum of electricity on an one-year footing.

Care must be taken in order to avoid shadowing from the milieus. If merely a portion of PV array is shaded the energy loss can be over-proportional compared to the loss of incident solar energy.

  • Structural Factors – These include the requested energy, weight and size of chosen faculty, ways of arrested development and operating and care schemes ( easiness of installing and handiness of system constituents ) of the BIPV system.

For taking the type and size of BIPV three things which need to be considered are the energy required, architectural or aesthetic considerations, and economic factors.

In order to find the coveted power evaluation of a BIPV system for a edifice, the entire electrical demands of the edifice demand to be evaluated. The optimal power evaluation of the BIPV system can so be calculated based on the part of the edifice ‘s electricity that will be supplied by this BIPV system.

Architecturally, the size of the BIPV system is physically limited to the dimensions of the edifice ‘s available surface country. The balance between the sum of power required and the sum of surface country available can find the type of PV engineering that will be used. Each engineering has an associated scope of end product in watts per square pes or per square metre and cost per W.

  • Aesthetic and Economic Factors – The faculty should suit in the milieus and must be harmonious with other building stuffs. It should be multifunctional ad replace, whenever possible, other building stuffs.
  • Electrical issues – Electrical issues chiefly involve the public presentation and dependability of the inverters. BIPV systems include individual inverters, master-slave inverter constellations, modular inverters, and parallel independent or threading inverters.

A BIPV system is most vulnerable to a single-point failure where the power generated from the BIPV array must be transformed and synchronized through the inverter from DC to AC power and so fed into the edifice or an electric public-service corporation system. If the inverter fails, the full system malfunctions.

A BIPV system must be designed so that multiple inverters work together ensures greater system dependability. If one inverter malfunctions or requires care, it can be disconnected from the array and the BIPV system can still run.

  • Safety Issues – With respects to the electrical safety issues, it is of import to observe that lightning, land mistakes, and power line rushs can all do high electromotive forces in otherwise low-tension BIPV systems. The international electric codifications, ordinances and edifice codifications are being amended to include PV engineerings and reference fire and safety issues refering BIPV design, installing, and care.

( Eiffert and Kiss 2000 ) , ( Jesus, Manuela and Pereira 2005 ) and ( Moor, Borg, Boer and Oldenkamp 2004 )

2. PV Technology

2.1 Current Status of technological Development of Photovoltaics

Photovoltaics industry has already become a billion dollar industry. This industry is sing rapid growing as there are concerns over fuel supplies and C emanations and this is taking the authoritiess and persons to disregard its current high costs. It will go genuinely mainstream when its costs are comparable to other energy beginnings. At the minute, it is about four times more expensive than other competitory commercial merchandises.

Three coevalss of photovoltaics are being developed and these will take solar power into the mainstream.

  • First Generation PV

These include the undermentioned types:

Mono Crystalline Cells ( c-Si )

Poly Crystalline Cells ( mc-Si )

Wafer & A ; eacute ; quivalents ( re-crystallisation etc )

These types of single-junction, silicon-wafer devices are now normally referred to as the first- coevals ( 1G ) engineering.

The First coevals solar cells are crystalline based photovoltaic cells that have dominated and still rule the solar faculty market. These solar cells use silicon wafers of between 4 ” to 8 ” size, and history for biggest portion of the planetary PV market. They are dominant because of their high efficiency and proved engineering. This is despite of the fact that their fabrication costs are really high ; a job that will hopefully be resolved by the 2nd coevals cells. The fabricating procedure of 1G solar cell involves high energy intensive production attempt and is labour intensive ; this has prevented important cost decreases. 1st coevals solar cells have the highest efficiency of all three coevalss, between 13 % to 20 % and nearing the theoretical modification efficiency of around 30 % .

  • Second Generation PV

The following measure in the development of PV to cut down cost/W is to take the unneeded stuff from the cost equation by utilizing thin-film devices. Second-generation ( 2G ) engineerings are besides single-junction devices and are designed to utilize less stuff while seeking to keep the efficiencies of 1G PV. The chief types in this class are:

Amorphous Silicon ( a-Si )

Cadmium Telluride ( CdTe )

Copper Indium Gallium Selenide – CuIn ( Ga ) Se2 – ( CIGS )

Second coevals cells, although significantly cheaper to bring forth than first coevals cells have lower efficiencies of between 6 % to 12 % .

The chief advantages of 2nd coevals, thin-film solar cells, are the lower fabrication costs and their flexibleness. Thin-film engineering has led to the development of lightweight, aesthetically delighting solar inventions such as solar herpes zosters and solar panels that can be rolled out onto a roof or other surface. CdTe, CIGS and a-Si are applied in uninterrupted axial rotation to-roll or batch procedure to back uping substrates such as glass, unstained steel or polymer foil therefore cut downing material mass and therefore costs. It is going obvious that the 2nd coevals cells will rule the residential and power public-service corporation solar applications, particularly as new, higher-efficiency cells are being researched and produced.

It is now an accepted fact that as fabrication techniques evolve the production of 2nd coevals engineerings will derive important market portion in the following decennary. Even among major makers there is surely a tendency towards 2nd coevals engineerings.

  • Third Generation PV

Third-generation ( 3G ) attack to photovoltaics ( PVs ) aims to accomplish high efficiency devices but still utilizing thin-film, second-generation deposition methods. The construct is that this should be achieved merely by a little addition in cost and therefore cut downing the cost per Watt extremum. Increasing efficiency agencies lower costs because as smaller country is required for a given power this will besides cut down the costs of balance-of-system equipment, and therefore the efficiency values could dramatically diminish these costs per Watt extremum.

In order to accomplish efficiency betterments, devices have to get the better of the bounds for single-bandgap devices that limit efficiencies to either 31 % or 41 % , depending on concentration ratio ( Figure 8 ) . This requires multiple energy threshold devices.

Multiple energy threshold devices can be achieved in many different ways:

( a ) By increasing the figure of energy degrees ;

The construct of absorbing different subdivisions of the solar spectrum, by agencies of multiple energy degrees can be applied in many different device constructions.

  • Tandem or multicolor cells

The tandem or multicolor cell is the easiest of all the constellations. Solar cells made up of p-n junctions in different semiconducting material stuffs of increasing bandgap are placed on top of each other, such that the sunshine is foremost intercepted by the stuff of highest bandgap.

– III-V tandems

These are multi-junction cells that consist of multiple thin movies produced utilizing molecular beam epitaxy and / or metalorganic vapor stage epitaxy. Each type of semiconducting material has a characteristic set spread energy which allows it to absorb light most expeditiously over a part of the spectrum. The pick of semiconducting materials is such that they absorb about the full solar spectrum, and generate electricity from as much of the solar energy as possible.

  • Concentrator systems

Concentrator cells consist of four- or even five-bandgap cells. These are non merely higher in efficiencies but besides have higher electromotive force and lower current than three-bandgap cells. This reduces the series opposition losingss which is an of import factor for concentrator cells.

Tandems suit the concentrator systems because as the figure of cells addition in the stack, the voltage-to-current ratio besides increases and this decreases the resistive losingss in the high current densenesss of concentrator cells. However, concentrators do non work with an cloudiness sky and necessitate direct sunshine for proper operation, unlike flat-plate cell faculties.

  • Thin-film tandems – a-Si tandems, Si nanostructure tandems

A tandem thin-film Si solar cell comprises of a crystalline substrate, a first unit cell positioned on the transparent substrate, the first unit cell consisting a p-type window bed, an i-type absorber bed and an n-type bed, an intermediate contemplation bed positioned on the first unit cell, the intermediate contemplation bed including a hydrogenated n-type microcrystalline Si oxide of which the O concentration is profiled to be bit by bit increased and a 2nd unit cell positioned on the intermediate contemplation bed, the 2nd unit cell consisting a p-type window bed, an i-type absorber bed and an n-type bed.

  • Intermediate-level cells: dross PV and intermediate set solar cells

The attack adopted with these devices is to present one or more energy degrees within the bandgap such that they absorb photons in analogue with the normal operation of a single-bandgap cell. This semi-parallel operation offers the potency to be much less spectrally sensitive but to still give high efficiencies.

( B ) Multiple bearer brace coevals per high energy photon or individual bearer brace coevals with multiple low energy photons ;

Carriers generated from high-energy photons ( at least twice the bandgap energy ) absorbed in a semiconducting material can undergo impact ionisation events ensuing in two or more bearers near to the bandgap energy. But impact ionisation has a vanishingly little chance in bulk stuff. A device based on this attack requires a agency of leting the multiple electron-hole braces to be separated, transported, and collected in a majority construction. This is the topic of ongoing research.

( degree Celsius ) Capturing bearers before thermalization.

The concluding option for increasing efficiencies is to let soaking up of a broad scope of photon energies but so to roll up the photogenerated bearers before they have a opportunity to thermalize. A hot-carrier solar cell is merely such a device that offers the possibility of really high efficiencies but with a construction that could be conceptually simple compared with other really high efficiency PV devices – such as multijunction massive tandem cells. For this ground, the attack lends itself to thin-film deposition techniques with their attendant low stuff and energy use costs and the ability to utilize abundant, atoxic elements.

Summary of Cell Efficiencies for 1G, 2G and 3G Photovoltaics

The Graph 3 shows a historic sum-up of cell efficiencies for assorted photovoltaic engineerings. The multijunction solar cells have achieved the highest efficiencies, and these are increasing at a rate of about 1 % per twelvemonth in recent old ages. The efficiencies of the Multijunction cell have the potency to near 50 % in the coming old ages. ( Bagnall, D.M. and Boreland, M. ( 2008 ) ; Conibeer, G. , ( 2007 ) ; Ruoss, D. ( 2008 ) )

2.2 Future Challenges and Developments

As we have discussed, advancement in PV engineering should be measured in $ /W, and many scientific progresss, as intriguing though they may be, will merely be relevant to the industry if they can be implemented at low-cost costs. In this sense, we can imagine two paths to cheaper photovoltaic energy that will be brought approximately by new scientific discipline and 3G constructs. The first is based on the matter-of-fact usage of new engineering to better the public presentation or diminish the cost of current devices. The 2nd, more radical, possibility might affect new whole-device constructs. Indeed, in recent old ages we have seen the outgrowth of dye-sensitised ( Gratzel, 2001 ) and polymer-based solar cells ( including organic/inorganic loanblends ) ( see Brabec and Sariciftci, 2001 ; Kanicki, 1986 ) as basically new types of device, and although none of these have come near to surpassing wafer- based Si devices in cost or efficiency, there is every opportunity that these devices could show step-change betterments or that new types of device may yet emerge. ( Bagnall, D.M. and Boreland, M. 2008 )

The PV industry is continuously seting attempt towards cost decrease so that PV could go a self-sustained industry without the demand for subsidies. Characteristic developments in solar industry are the undermentioned:

  • Strong investing in thin-film industry. Companies based on Si, such as QCells are puting in subordinates based on thin-film engineering. Besides LCD equipment makers are developing equipment for solar industry and even complete lines for thin-film production ( such as Oerlikon or Applied Materials ) ; a diverseness of technological inventions.
  • Reaching stableness and device dependability for cheaper engineerings, such as dye-sensitised cells.

12 17 October 2008 ZONNESTROOM 2008

  • Expansion of fabrication volume and accomplishment of lower costs, such as the instance of First Solar.
  • Silicon deficit is driving investings into poly-Si workss. Another tendency is the production of metallurgical Si, which allows for less capital costs for production machinery and tools.
  • ribbon/sheet adult Si, capital costs and the sum of Si used can be diminished.
  • Thinner Si wafers and new poly-Si stuff supplies.
  • Faster processing/higher production volume.
  • Growth of the market for BIPV ( Building Integrated PV ) merchandises and flexible PV merchandises.
  • Concentrating engineering could go attractive due to take down solar electricity costs in really cheery states ( Africa, USA, Middle East, India, China, Mexico and Australia ) .
  • Emerging of new PV engineerings.

As the industry and the volumes produced are acquiring larger and larger, more attending will hold to be paid to the undermentioned issues: As the industry and the volumes produced are acquiring larger and larger, more attending will hold to be paid to the undermentioned issues:

  • Natural stuffs constrictions for different engineerings ( inexpensive solar quality glass, Te and In ) . Procuring natural stuffs supply is necessary.
  • Reduce waste, both of natural stuffs and of resources used in production.
  • Bing able to pull extremely qualified and good trained forces. ( Jol, J.C. , Mandoc, M.M.and Molenbroek, E.C. 2008 )
  • 3. Costss and Benefits

    3.1 Costss of PV Systems

    3.2 Advantages, Disadvantages and restrictions of BIPV Systems

    3.3 Future Costss

    4. Decisions

    The solar market is dining. The solar market has shown mean growing rate of more than 35 % over the last 10 old ages. The market value was estimated to be 13 billion Euros in 2007 and over 100,000 people have found employment in the solar concern. The cost of solar panels continues to drop every bit good. Since the early old ages of solar panels, panel monetary values have dropped by 20 % for each duplicating in cumulative production. Important states for the solar market are Germany, Japan, the US and non the least far Asiatic states with China as a strong Centre point.

    The renewable energy market is no longer a niche market. It was about a $ 150 billion market in 2007. Almost 60 % of this was spent on renewable power coevals undertakings in plus finance, which accounts for 23 % of all new power coevals capacity worldwide in 2007. Solar investing truly took off in 2007, when $ 28.6 billion of new investing flowed into solar, of which $ 18 billion ( approx. ˆ 13 billion ) was spent on freshly installed PV power. The one-year growing is at an mean rate of 254 % since 2004. It is seen now as a mature market by fiscal establishments.

    The market portion of the pillar of the solar industry, crystalline PV faculties, has still a market portion of approximately 90 % but the thin movie faculties are catching up. A batch of production installations are coming into production the coming old ages. In an international position, it is expected that the solar market will go on its high growing rates ( ~30-40 % per twelvemonth ) in the coming old ages. The coming old ages will demo an enlargement in the thin movie production capacity. However, crystalline Si will remain an of import pillar of the solar industry. Production is demoing a displacement toward Asia ( China, Taiwan, Philippines ) . Nevertheless production capacity is besides being built in Europe. In the short term, an glut state of affairs could originate. In the longer term the market will be able to catch up with the enlargement in production capacity that will happen in the coming few old ages.

    From the fiscal market position solar is now seen as a mature market which is safe to put in. International related investings financess and venture capitalists are puting more and more capital in solar companies and undertakings. Large investings are needed in the sector to let for high growing rates in the coming old ages.

    On the engineering side, In an international context, the relationship between a strong industry and a strong place market is good seeable. The market in Japan ‘collapsed ‘ after subsidies were terminated and Japan lost it ‘s international top place in production. At this minute, nowhere in the universe can be found so many thin movie start-up companies as in Germany, where presently the most PV faculties are sold. A strong internal market besides creates occupations in the installing sector. In footings of occupation Creation. Forexample: Germany has 40.000 occupations in PV, Grid para may be reached in the Netherlands in 2015 or even earlier every bit good. It should be realized though that the volumes necessary to make this low PV kWhprice will hold to be realized and it will non go on if everybody starts waiting for grid para. Besides, it is non expected that the PV-consumer market will straight take off every bit shortly as grid para is reached. Grid para is in fact already reached in South Italy by now, but the market is still little. However, a sufficiently interesting pay back clip, consciousness of the possibilities and willingness to pay up forepart for families and an substructure able to offer cost-efficient rooftop PV-systems will hold to be in topographic point for this to go on. Last but non least, a batch will depend on the development of the conventional electricity monetary values in the old ages to come. ( Jol, J.C. , Mandoc, M.M.and Molenbroek, E.C. 2008 )

    5. Mentions

    • Wekken, T ( 2007 ) . Power quality and Utilisation Guide, Distributed coevals and renewables, photovoltaic installings [ on-line ] . Available from hypertext transfer protocol: //www.scribd.com/doc/3012823/Photovoltaics [ Accessed on 27 Oct 2009 ]
    • Eiffert.P and Kiss.G.J. ( 2000 ) , Building-Integrated Photovoltaic Designs for Commercial and Institutional constructions. A Sourcebook for Architects [ online ] . NREL/BK-520-25272. Available from hypertext transfer protocol: //www.nrel.gov/docs/fy00osti/25272.pdf [ Accessed on 13 Dec 2009 ]
    • Sunlight Electric, LLC. , 2002-2009 [ online ] Available from: hypertext transfer protocol: //www.sunlightelectric.com/pvhistory.php [ Accessed on 27 Oct 2009 ]
    • Wisconsin Public Service Corporation ( 2000 ) [ on-line ] . Available from: hypertext transfer protocol: //www.buildingsolar.com/technology.asp [ Accessed on 27 Oct 2009 ]
    • James, P.A.B, Jentsch, M.F. and Bahaj, A.S. , ( 2008 ) Quantifying the added value of BiPV as a shadowing solution in atria. Solar Energy Journal, [ online ] 83 ( 2 ) pp 220-231. Available from: hypertext transfer protocol: //www.sciencedirect.com.abc.cardiff.ac.uk/science? _ob=MImg & A ; _imagekey=B6V50-4T7HYK9-2-T & A ; _cdi=5772 & A ; _user=129520 & A ; _orig=browse & A ; _coverDate=02 % 2F28 % 2F2009 & A ; _sk=999169997 & A ; view=c & A ; wchp=dGLbVzz-zSkzk & A ; md5=947f9679e28a5d75fdd0842654bd3387 & A ; ie=/sdarticle.pdf [ Accessed 14 Dec 2009 ]
    • Jesus, L. , Manuela, A. and Pereira, E. , ( 2005 ) The Difficulties of Implementation of BIPV in Portugal, rejection or absentation? [ online ] . Available from: hypertext transfer protocol: //repositorium.sdum.uminho.pt/bitstream/1822/6885/2/Jesus_CI_2005.pdf [ Accessed 27 Oct 2009 ]
    • Moor, H.H.C. , Borg, N.J.C.M. , Boer, B.J. and Oldenkamp, H. , ( 2004 ) , Lay-out of Building incorporate PV systems. In: fifth ISES Europe Solar Conference June 2004, Freiburg Germany [ online ] . Available from file transfer protocol: //ftp.ecn.nl/pub/www/library/report/2004/rx04073.pdf [ Accessed on 14 Dec 09 ]
    • Bagnall, D.M. and Boreland, M. ( 2008 ) Photovoltaic Technologies. Energy Policy, [ online ] 36 ( 12 ) pp 4390-4396. Available from hypertext transfer protocol: //www.sciencedirect.com.abc.cardiff.ac.uk/science? _ob=MImg & A ; _imagekey=B6V2W-4TW0SWR-5-C & A ; _cdi=5713 & A ; _user=129520 & A ; _orig=browse & A ; _coverDate=12 % 2F31 % 2F2008 & A ; _sk=999639987 & A ; view=c & A ; wchp=dGLbVzz-zSkWA & A ; md5=3cc7fe5f76574e4d9bfc13a2c1d96f37 & A ; ie=/sdarticle.pdf [ Accessed 17 Dec 2009 ]
    • EurObserv’ER, PhotovoltaicEnergyBarometer,2008 [ online ] . Available from: hypertext transfer protocol: //www.eurobserv-er.org/pdf/baro184.pdf [ Accessed: 17 Dec 09 ]
    • A Guide to Photovoltaic ( PV ) System Design and Installation, 2001 [ on-line ] . Available from: hypertext transfer protocol: //www.energy.ca.gov/reports/2001-09-04_500-01-020.PDF [ Accessed: 14Dec 09 ]
    • Ruoss, D. ( 2008 ) Market Overview of Silicon and Non-Silicon Technologies and a Perspective of the PV Market and Technologies Development [ online ] . Available from www.envision.ch/index.php? option=com_docman & A ; task [ Accessed: 17 Dec 09 ]
    • Conibeer, G. , ( 2007 ) , Third-generation photovoltaics. Materials Today [ online ] 10 ( 11 ) pp 42-50. Available from: hypertext transfer protocol: //www.sciencedirect.com/science? _ob=MImg & A ; _imagekey=B6X1J-4PWDT21-M-K & A ; _cdi=7244 & A ; _user=10 & A ; _orig=search & A ; _coverDate=11 % 2F30 % 2F2007 & A ; _sk=999899988 & A ; view=c & A ; wchp=dGLbVzW-zSkzV & A ; md5=84028f687bf61e4d4cfb276fab93973b & A ; ie=/sdarticle.pdf [ Accessed: 17 Dec 09 ]
    • Geisz, J. , Olson, J. , Friedman D. , Kurtz, S. , McMahon, W. , Romero, M. , Reedy, R. , Jones, K. , Norman, A. , Duda, A. , Kibbler, A. , Kramer, C. , and Young, M. ( 2004 ) III- V/Silicon Lattice-Matched Tandem Solar Cells. In: DOE Solar Energy Technologies Program Review Meeting, October 2004, Denver, Colorado [ online ] . Available from: hypertext transfer protocol: //www.nrel.gov/docs/fy05osti/36991.pdf [ Accessed: 17 Dec 09 ]
    • Kolodziej, A. , Wronski, C.R. , Krewniak, P. and Nowak, S. ( 2000 ) Silicon thin movie multijunction solar cells.Opto-Electronics Review [ online ] 8 ( 4 ) pp339-345. Available from hypertext transfer protocol: //www.wat.edu.pl/review/optor/2000/4/8 ( 4 ) 339.pdf [ Accessed: 17 Dec 09 ]
    • Jol, J.C. , Mandoc, M.M.and Molenbroek, E.C. ( 2008 ) Solar Electricity 2008 – A Technical and Economic Overview [ online ] . Available from: hypertext transfer protocol: //www.ecofys.org/com/publications/documents/PVStatus2008_NLperspectief_Eng_17okt08.pdf [ Accessed: 16 Dec 09 ]

    6.0 BIPV Terminology

    Building-integrated photovoltaic ( BIPV ) is a comparatively recent new application of photovoltaic ( PV ) energy engineerings. These are some of the basic footings used in depicting PV engineerings, BIPV merchandises, and their utilizations:

    Antireflection coating– a thin coating of a stuff that reduces light contemplation and additions light transmittal ; it is applied to the surface of a photovoltaic cell.

    Balance of System ( BOS )– Non-PV constituents of a BIPV system typically include wiring, switches, power conditioning units, metres, and battery storage equipment ( if required ) .

    Bypass rectifying tube– a rectifying tube connected across one or more solar cells in a photovoltaic faculty to protect these cells from thermic devastation in instance of entire or partial shading of single cells while other cells are exposed to full visible radiation.

    Conversion efficiency– Sum of electricity a PV device green goodss in relation to the sum of light reflecting on the device, expressed as a per centum.

    Curtain wall– an exterior wall that provides no structural support.

    Encapsulant– Plastic or other stuff around PV cells that protects them from environmental harm.

    Grid-connected– Inter-tied with an electric power public-service corporation.

    Inverter– Device that transforms direct-current ( DC ) electricity to jumping current ( AC ) electricity.

    Faculty– Commercial PV merchandise incorporating interrelated solar cells ; faculties come in assorted criterion sizes and can besides be custom-made by the maker.

    PV array– Group or twine of affiliated PV faculties runing as a individual unit.

    PV laminate– Building constituent constructed of multilayers of glass, metal or plastic and a photovoltaic stuff.

    PV solar cell– Device made of semiconducting material stuffs that convert direct or spread light into electricity ; typical PV engineerings are made from crystalline, polycrystalline, and formless Si and other thin-film stuffs.

    Solar entree– Sunstroke incidence of solar radiation that occurs on a PV system ‘s surface at any given clip ; it determines the possible electrical end product of a BIPV system.

    Stand-alone– Remote control power beginning offprint from an electric public-service corporation grid ; a stand-alone system typically has a battery storage constituent.

    ( Eiffert.P and Kiss.G.J. 2000 )

    How to cite this page

    Choose cite format:
    The technology for photovoltaic. (2018, Sep 18). Retrieved August 24, 2019, from https://phdessay.com/the-technology-for-photovoltaic/.